20101 The specified file was of the incorrect type or corrupted
20102 Out of memory
20103 The picture does not have a palette
20104 The picture does not have a bitmap
20105 The specified format parameter (or DataFormat) is not supported
20106 The specified bit-depth is invalid
20107 An error occurred while writing the file
20108 The specified format parameter does not support the image
20109 The specified picture is invalid
20110 Invalid DIB: Not in Global Entry Table List
20111 Invalid DIB: contains an Invalid BITMAPINFOHEADER
20112 Invalid DIB: can't lock in memory
20113 Invalid DIB: size of BITMAPINFOHEADER does not match entry size in the global entry table
20114 Invalid DIB: number of bit planes must be 1
20115 Invalid DIB: must be in uncompressed (BI_RGB) format
20116 Invalid DIB: bit depth must be 1,4,8, or 24
20117 Invalid DIB: bit depth must 8 or 24
20118 Invalid DIB: invalid color table (Must be 1 4 8 24)
20119 Invalid DIB: size of data in the Global Entry Table does not match size in BITMAPINFOHEADER
20120 The source images must have the same bit-depth
20121 The specified image area is invalid
20122 The specified magnitude is invalid
20123 The specified softness is invalid
20124 The specified sharpness is invalid
20125 No manipulation was specified
20126 The specified rotation angle is invalid
20127 The specified brightness is invalid
20128 The specified contrast is invalid
20129 The specified area is invalid
20130 The specified option is invalid
20131 Operation Failure
20132 The specified compression parameter is invalid
20133 The specified TIFF compression scheme is not supported
20134 Can't find IKJPG16 dll
20135 Invalid version of IKJPG16 dll loaded
20136 The image could not be displayed. You may be low on memory.
20137 The X value is NOT within the bounds of the image
20138 The Y value is NOT within the bounds of the image
20139 Mismatch of the bit depth of the image and the number of colors in the palette. Setting a Picbuf image to a Palette requires the bit depth of the image match the number of colors in the palette
20140 Invalid palette used in setting a image to a palette
20141 A True Color Image does not have a palette
20142 An invalid palette with < 2 colors has been detected
20143 Invalid Option: must be >= 0 or <= 2
20144 Number of colors must be >=2 or <= 256
20145 Desired colors in palette exceeds limit of 256 colors with 20 colors included in the System Palette
20146 A ZASSERT has FAILED. Fatal error.
20147 Image contains more than 236 colors
20148 This operation only operates on 8 bit images
20149 Cannot load IKFAX.DLL
20150 Cannot find procedures to load in IKFAX.DLL
20151 Invalid CCITT group 3 or 4 file.
20152 Invalid CCITT group 3 or 4 file loading option. Cannot load only the palette
20153 Invalid image number. It must be between 0 and the number of images - 1.
20154 Draw failed. Could not create DC.
20155 Draw failed. Could not execute draw statement
20156 Text Draw failed. Could not execute text draw statement
20157 Text AutoSize failed.
20158 Select area must be greater than 0.
20159 Can't find DECO_32.DLL
20160 Bad DECO_32.DLL
20161 FIF decompression error
20162 Cannot find FTT file for FIF decompression.
20163 Color reduction code for this operation requires an 8 bit image
20164 Operating System Error has occurred. Please notify Customer Support
20165 The result of this operation has generated too many colors
20166 The result of this operation has generated too few colors
20167 The settings for the reserved entries are out of bounds < 10 or > 245
20168 The selected palette is invalid.
20169 Loading LZW compressed TIFF files is NOT allowed unless the user has authorization through Unisys. (see LZW property).
20170 Loading GIF files is NOT allowed unless the user has authorization through Unisys. (see LZW property).
20171 Storing LZW compressed TIFF files is NOT allowed unless the user has authorization through Unisys. (see LZW property).
20172 Storing GIF files is NOT allowed unless the user has authorization through Unisys. (see LZW property).
20173 FIF image area is too large for double scale output.
20174 JPEG file type is not supported.
20175 Source index is not used in the image
20176 Destination index is not used in the image
20177 Can't load MKFILE16.DLL
20178 Can't find mkfLoad prodcedure in MKFILE16.DLL
20179 Can't find mkfLoadSprite prodcedure in MKFILE16.DLL
20180 Unknown symbol found while reading file
20181 An error was encountered while reading the PNG file
20182 An error was encountered while writing the PNG file
20183 An error was encountered while reading the JPEG file
20184 An error was encountered while writing the JPEG file
20185 Bad red color range
20186 Bad green color range
20187 Bad blue color range
20188 Wrong FIF DLL Version
20189 FIF file is greater than version 6.0. Contact vendor about updated support
20190 One or more of the Load parameters is Invalid
20191 Original Resolution of the image is unknown, or not in given pixels
20192 An error was encountered in either reading or finding the FTT file
20193 An error was encountered while reading the FIF file
20194 More than 2 points must de defined for a polygon
20195 More than 1 point must de defined for a polyline
20196 An error was encountered while reading the file
20197 The specified gamma value is invalid
20198 For the current compression options, the image can be no greater than 1 bit deep
20199 For the current compression type, the compression option is invalid
20200 Error opening output file
20201 Unsupported colorspace in image
20202 Unsupported planar configuration in image
20203 Specified TIFF tag is unknown
20204 Specified TIFF tag not found in file
20300 This control does not support that type of picture
20301 Array is of zero size or too many dimensions
20302 Picture is zero size
20303 Invalid chunk index
20304 Opening the Clipboard failed
20305 Emptying the Clipboard failed
20306 Control does not contain a Dib
20307 Setting the Dib to the Clipboard failed
20308 Closing the Clipboard failed
20309 Getting the Dib on the Clipboard failed
20310 Scrollbars can't be used if AutoSize is TRUE
20311 Scrollbars can't be used if AutoScale is TRUE
20312 AutoScale can't be TRUE if Scrollbars are used
20313 AutoSize can't be TRUE if Scrollbars are used
20314 The From Control is Invalid
20315 The To Control is Invalid
20316 The Mask Control is Invalid
20317 The From Control does not contain an image
20318 The To Control does not contain an image
20319 The Mask Control does not contain an image
20320 The Control parameter is NULL
20321 The Control does NOT contain a palette
20322 The Control contains an image. It can't
20323 The Control must contain an image or a palette
20324 The Control is already System Colors add to it
20325 The 'lines' parameter must be >= 0
20326 The window for the control that handles the callback message does not exist
20327 Not a valid MousePointer property.
20328 Cursor file cannot be found
20329 Cursor file is bad
20330 Could not find cursor in file
20331 cursor Index must be one of 13 through 31
20332 WARNING\nUse of this software for developing any software providing LZW capability for any purpose is not authorized unless user first enters into a license agreement with Unisys under U.S. Patent No. 4,558,302 and foreign counterparts (see LZW property)
20333 ScrollBarsSmallChange and ScrollBarsLargeChange value must be greater than 0.
20334 RePos can't be used if AutoSize is True.
20335 RePos can't be used if AutoScale is True.
20336 RePos control coordinates are out of range. Must be >= 0 and < Height or Width
20337 RePos image coordinates are out of range. Must be >= 0 and < Xresolution or Yresolution
20338 ReduceColors property must be one of 2 through 256
20339 DrawWidth property must be one of 1 through 32767
20340 Open file failure:
20341 Close file failure:
20342 Write file failure:
20343 ScaleScreen property must be one of 1 through 32767
20344 ScaleImage property must be one of 1 through 32767
20345 Attempt to paint a PicBuf with ScaleScreen:ScaleImage ratio less than 1:200 or greater than 200:1
20346 hDib property is write only
20347 hPalette property is write only
20348 Contents property is read only
20349 Selection flag is True with SelectWidth = 0 and/or SelectHeight = 0
20350 Control is NOT an ImageKnife control
20351 Could not set the palette color.
20352 Filename Property is empty.
20353 Filename Property is too large to copy.
20354 Out of memory. Operation Failure. Shutdown Processes and try again
20355 Number to process in array is not within the bounds of the array
20356 Array is not allocated
20357 Array must be 1 dimensional
20358 the hDibDC property can only be set to 0
20359 releasing the DC for the DIB failed
20360 locking DIB failed
20361 Device Context creation failed
20362 Control already has created a Device Context for the DIB. Only one at a time is allowed.
20363 Control array must contains some controls
20364 No controls or files to operate on
20365 An unroverable error has occurred. The control is unstable. Contact customer support.
20366 Value outside of valid range of >= 0 and <= 3
20367 ColorDepth can't be set a run time
20368 Invalid draw arrow property setting
20369 Invalid draw style property setting
20370 Invalid fill style property setting
20371 The hDC property is read only.
20372 Not a valid ImageFormat value.
20373 Not a valid LoadScale.
20374 The LZW property is not available at run time.
20375 MouseIcon can only be a *.CUR or *.ICO file.
20376 Could not create Picture.
20377 The PrinterhDC property is write only.
20378 Not a valid ResizeMode value.
20379 Can't set ScaleImage or ScaleScreen with AutoScale True.
20380 Not a valid ScrollBars value.
20381 Not a valid TextAlignment value.
20382 The TextWide property is read only.
20383 The TextHigh property is read only.
20384 The Xresolution property is read only.
20385 The Yresolution property is read only.
20386 Bad array type parameter has been found
20387 The AutoLoad property is not available at run time.
20388 The Embedded property is not available at run time.
20389 System failure (GetPaletteEntries)
20390 Drawing Destination parmeter must be a short
20391 Invalid write option property setting
20392 Value outside of valid range of >= 0 and <= 2
20393 This fuctionality not implemented in this version. To obtain a version of ImageKnife/OCX that supports decompression of fractal images, contact OLYMPUS Software Europe GmbH Technical Support.
20394 This fuctionality not implemented in this version. To obtain a version of ImageKnife/OCX that supports drawing, contact OLYMPUS Software Europe GmbH Technical Support.
20395 Clipboard Destination parmeter must be a short
20396 Number of points is non-existent or of wrong type
20397 type of region to create is invalid
20398 region at location does not exist
20399 location parameter is required
20400 bad location for insertion of region
20401 enabled parameter is of wrong type
20402 bad raster operation setting
20403 can't be set to less than zero. Printing to area out of range
20404 Printing will be disabled. Width to print must be > zero
20405 Printing will be disabled. Height to print must be > zero
20406 can't be set to less thn or equal to zero. Printing to an empty area
20407 Not available in the 16 bit OCX version
20408 System is out of resources
20409 an unknown exception has been detected
20410 an assertion has failed
20411 Not a valid LoadOption
20412 May not access this control while it is performing a Callback method
